How much do you know about infrared thermometers
- 2019-06-14-

The infrared thermometer has the advantages of sensitive response, good linearity, high accuracy, and is not affected by the temperature and viscosity of the measured medium during the measurement process.
1. The infrared thermometer has high accuracy, good linearity, and stable operation, which improves the accuracy of measurement and the credibility of the data, and overcomes the problem that some appearances are not stable, which causes the problem of unreliable measurement data. After many on-site comparisons, the errors were within the control scale, which increased the degree of trust in the external appearance, and ended the unscientific measurement method for calculating the water volume according to the function curve of the pump. Human Factors.
2. The structure of the infrared thermometer is simple, the sensor has no moving parts, and there are no measurement errors or appearance defects caused by mechanical motion wear or impurities surrounding, so the fault rate is very low, the repair amount is greatly reduced, and then a lot of manpower and material resources are saved. .
3. The infrared thermometer has a variety of interface circuits, which can be easily connected to a data collection terminal or computer to complete data collection, analysis, and automation.
Management of Infrared Thermometer 1. Compare the test data with the previous test results, carefully analyze the suspicious data presented, find possible causes, deal with them in time, and make an analysis statement of the operation of the thermometer.
2. Establish the operation file of the infrared thermometer, including the manufacturer, type, production date, device address, pipe diameter, calibration time, etc. of the thermometer to facilitate the external surface protection management.
3, strengthen inspections and inspections, regular testing and calibration. We first choose two methods, one is to use a relatively high precision portable thermometer and infrared thermometer for measurement comparison; the second is to use a flow appearance checker to verify the flow converter, check The technical indicators are correct, and test data are archived.